Summary
Polished concrete can become slippery, especially with water, oil or cleaning residue on the surface. Shine alone cannot tell you how much grip a floor provides. Before choosing a finish, describe how the area will be used and ask for slip-resistance evidence that matches the finished surface and expected conditions.

A dry living room and an entrance that receives wet shoes ask different things of the same floor. Choosing by a photograph misses that difference. The useful question is whether the proposed finish suits the people, footwear and contamination the area will actually receive.
When discussing concrete polishing, put those conditions in the brief alongside the appearance you want. That gives the contractor something more useful to assess than a request for a shiny floor that is also “non-slip”.
Why can the same floor feel different when wet?
Walking depends on grip where the sole meets the floor. Water, grease or a film left by cleaning changes that contact. Surface texture and the sole’s material and tread also influence what happens at that small contact area.
Think about an entrance after rain. A person arrives with wet shoes, turns towards a counter and steps off a mat. The polished surface has not been replaced, but the contact conditions have changed. A dry inspection would miss the situation that matters.
WorkSafe Queensland’s guidance on floor surfaces explains that a floor’s suitability depends on its use, contaminants and users. A surface that provides adequate grip dry may behave differently wet. Assess the area in its expected conditions.

- Left: a treaded sole and a dry floor surface.
- Right: the same schematic sole and floor, with water shown in blue.
- Orange arrows: the direction of movement in both cases. This shows the change in conditions, not a slip test or a measured contact pattern.
Does a glossy finish automatically mean poor grip?
Gloss describes how the surface reflects light. Slip resistance describes its interaction with a foot or test slider under stated conditions. They answer different questions. A bright reflection in a photo does not provide a slip test result.
Likewise, visible aggregate does not establish grip. The stones may be visible within a smooth finished surface; seeing them does not tell you the texture at the walking surface. Our explanation of aggregate exposure and sheen separates those appearance choices.
Ask how the final surface will be achieved, including any protective treatment. A sample can help agree the look and feel, but it should not be described as proof of installed slip performance unless the relevant testing and conditions support that claim.
What should you ask about a slip test?
Start with the actual report, rather than an isolated rating in a quote. Check what was tested, which method was used, whether the condition was wet or dry, and whether the result applies to the finish being proposed.
The UK Health and Safety Executive’s guide to assessing floor slip resistance explains how test methods help assess surfaces. In a pendulum test, a controlled rubber slider moves across a defined area and the instrument records its response. This measures a stated interaction, rather than judging shine by eye.
For your project, ask the person specifying or testing the floor to explain the applicable Australian requirements and the evidence needed for that location. A report for a different treatment or a dry condition cannot simply be assumed to describe your finished floor when wet.
Useful questions include:
- Does this report identify the complete proposed finish, including its final treatment?
- Do the test conditions represent how this part of the building will be used?
- Is the result from a sample or the installed surface, and what further checking is included?
- What cleaning and maintenance are needed to retain the intended surface condition?
Should every part of the building use the same finish?
Map the areas before settling on one appearance throughout. An indoor lounge, covered entrance and exposed path can have different water exposure, footwear and cleaning demands. A continuous colour scheme does not require treating those conditions as identical.
For example, include the line where visitors leave an entrance mat in the assessment. Consider where umbrellas drip and where people turn or carry items. In a business, add the substances handled nearby and how quickly a spill can realistically be removed.
A texture selected for more demanding conditions may change the appearance and cleaning work. Discuss that trade-off while the finish is being selected. Ask to see an appropriate sample and agree which areas it represents.
For bathrooms, waterproofing, falls and shower details need their own assessment alongside grip. Our polished concrete bathroom guide covers those separate decisions.
Will a sealer or additive make any floor slip resistant?
There is no useful universal answer without identifying the treatment and intended use. “Sealed” can describe different surface systems. Changing the final treatment changes the surface people walk on, so the proposed combination needs to be considered as a whole.
If an additive or another treatment is proposed, ask what supports its use on that floor and how its finished performance will be assessed. Also ask how it affects cleaning, appearance and later maintenance. A product name alone does not answer those questions.
For an existing floor, record where the problem occurs and under what conditions before commissioning a treatment. A residue problem, worn surface and unsuitable finish can call for different work. Avoid choosing a permanent surface change solely from the floor’s appearance.
How does cleaning affect the decision?
A finish needs a cleaning method that suits both the surface and the contamination. WorkSafe Queensland’s floor-cleaning guidance explains that unsuitable methods or chemical solutions can leave slippery residues. Cleaning should remove the contamination without leaving a new film behind.
Ask for written care instructions at handover. These should identify suitable products and equipment, how to manage spills and how the floor is returned to use after cleaning. For a workplace, agree who handles those tasks and how wet areas are kept out of use during the work.
This belongs in the buying decision. A finish whose care requirements do not fit the site may be a poor choice even if its initial appearance appeals. Compare the ongoing work as well as the installation scope.
Put the intended conditions in the quote
Send a simple plan or photos showing entrances, changes of surface and likely wet areas. Describe the footwear, traffic and cleaning arrangements. Ask the quote to identify the finish, relevant assessment or testing, maintenance instructions and any work excluded from that scope.
Dynamic Concrete Solutions provides concrete polishing. Get in touch with the area and intended use to discuss a suitable finish for your project.
Ask about your concrete floor
Tell us your suburb, approximate floor area, current finish and whether the space is indoors or outdoors. Include a phone number or email so the team can reply.
Have photos of the floor? Attach them through our full quote form, or call 0401 151 092.
